Description
The hydraulic distributor P80 is used for switching on/off and directing the working fluid between head flow generators (hydraulic pumps), head flow consumers (hydraulic cylinders, motors, etc.), and the tank. It is manufactured with up to 6 plungers with parallel or serial distribution.
Construction
The hydraulic distributor P80 is a mono-bloc distributor with manual control. The body is made of cast iron EN-GJL300, and the spools are made of carburized steel with hard chrome plating.
Mounting
The distributor is fixed with 3 (three) bolts M8.
Ambient temperature | -40C...+60C |
Viscosity | 12 ...800 mm2/s |
Fluid temperature | -15C...+80C |
Filtration | 10 to NAS 1638 |
Max operating pressure | 315 bar |
Back pressure | 50 Bar |
Nominal flow | 80 l/min |
Leakage(A,B-T) | 18cm3/min at 120bar |
Spool stroke | +/- 7 mm |
Actuating force | < 220 N |
Modification/ Spools | with 1 to 6 |
Note : Original equipment manufacture name and part numbers are used for reference purpose only, and are not intended to use that our replacement parts are used as equipments. some of the portion shown on this catalogue, for more product details please contact us or visit our website. Merbok is registered trade mark in India.
Thank you for Subscribe to the Newsletter.
You are already subscribed. Thank You.
Thank you for contacting us.