Manually or mechanically controlled hydraulic directional control valve Р40 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 6 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
Р40 is a mono-bloc distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
The distributor is fixed with two bolts M8
|Viscosity||12 ...800 mm2/s|
|Filtration||10 to NAS 1638|
|Max operating pressure||315 bar|
|Back pressure||50 bar|
|Nominal flow||40 l/min|
|Leakage(A,B-T)||15cm3/min at 120bar|
|Spool stroke||6 mm|
|Actuating force||< 200 N|
|Modification/ Spools||with 1 to 6|
Note : Original equipment manufacture name and part numbers are used for reference purpose only, and are not intended to use that our replacement parts are used as equipments. some of the portion shown on this catalogue, for more product details please contact us or visit our website. Merbok is registered trade mark in India.
Thank you for Subscribe to the Newsletter.
You are already subscribed. Thank You.
Thank you for contacting us.